please dont rip this site

Building Products - Low Volumn Construction

Try drilling the holes first. Then all you have to do is connect the dots if you are using a Dalo Pen. It's also easier to line up any artwork.

Make soldering as easy as possible and allow easy access to the pins to be soldered by:

Device Programmers@


Panels@ Cases@ Mounts@ Enclosures@ Cables@

CAM@ CNC@ Mills@  Laser Cutters  Position Sensors@

Casting@ Vacuforming@

Plexiglass@, Metals@

See also:


file: /Techref/building.htm, 3KB, , updated: 2017/9/21 18:59, local time: 2023/9/30 06:40,

 ©2023 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF=""> Low Volumn Production</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.

Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?


Welcome to!


Welcome to!