please dont rip this site

SV TEHS

Makers of the SXDEV Ubicom SX Embedded Controller Debugging Tool

The SX devices are totally compatible, drop in replacements for PIC 16C5x processors with emulation circuitry built in to the production device so what the ICE sees... is what the Processor saw!!! And they run at 50-75 MIPS (not just MHz, MIPS!). They are so fast, jitter-free, and deterministic, that many hardware functions can be "virtualized" into the software, reducing chip count and increaseing versatility.

The SXDEV can be powered from target board, draws less than 5 mA, 120...150 MHz, down to 3V, use any clock source (quartz, ceramic resonator, oscillator or external clock) and have advanced IDE with many features supported: for example, Timers and Bank0 support for SX48/52, data injection mode, extended watch attributes, external assembler SASM or MPASM, external simulator SxSim and external C compiler Hitech C (free version). Uses a serial port and finds it automatically. The IDE runs under Windows and is know to work under Linux using Wine.

Available from SXList.com in the US and Canada for $120 + s&h while supplies last.

Users manual in PDF or online CCS HTML (standard HTML coming soon) Screen shots: Debugging, Editing, Watches, Programming

The SX-DEV debugging with watches, source code and registers.


file: /Techref/com/svtehs/index.htm, 2KB, , updated: 2004/5/19 16:35, local time: 2024/3/29 04:34,
TOP NEW HELP FIND: 
100.24.12.23:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://www.massmind.org/Techref/com/svtehs/index.htm"> svtehs</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to massmind.org!

 

Welcome to www.massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .