please dont rip this site

Edirol UA-4fx USB Audio/MIDI IO device

Advanced Driver toggle switch

On the left side of the UA-4FX, there is an on/off switch called "Advanced Driver", which controls the USB mode of the device.

In advanced mode (Advanced Driver switch ON), the UA-4FX can record or play sound in native 24 bits, in either 44.100 Hz, 48.000 Hz or 96.000 Hz sample rates. You can choose sample rates using a switch next to the Advanced Driver switch. At 96 Khz, the device is either capture or playback only. MIDI is enabled. Advanced mode support was added in 2.6.28, see below. In normal mode (Advanced Driver switch OFF), the UA-4FX is fully USB sound compliant. It records at the rate of 44.100 Hz, in 16 bits, and is full-duplex. MIDI is disabled.

Sample rates switch

On the left side of the UA-4FX, there is a switch button called "SAMPLE RATE". The switch has four values: 44.1 kHz, 48 kHz, 96 kHz RECORD, and 96 kHz PLAY:

Cold/Hot reboot

Whenever you switch from Advanced ON to Advanced OFF, change sample rates, or change from 96 kHz RECORD to 96 kHz PLAY, you will either need to:

See also:


file: /Techref/io/edirol-UA-4FX.htm, 3KB, , updated: 2012/5/1 11:02, local time: 2024/10/12 02:03, owner: JMN-EFP-786,
TOP NEW HELP FIND: 
98.84.18.52:LOG IN
©2024 PLEASE DON'T RIP! THIS SITE CLOSES OCT 28, 2024 SO LONG AND THANKS FOR ALL THE FISH!

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://www.massmind.org/Techref/io/edirol-UA-4FX.htm"> Edirol UA-4fx USB Audio/MIDI IO device</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to massmind.org!

 

Welcome to www.massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .