Mike Sereg October 23, 2000 13:30 PM GMT Asks
I have the need to adjust the default print resolution for HP Laserjet 4 Plus to a 150dpi from its current 600 dpi. I manually make resolution changes, but each time the application sends data to the printer, the default 600 dpi is selected and used. I find I have to manually set it to 150 dpi prior to every print job. I wish to "hard set" or manually change the default dpi to 150. I am using MS Terminal Server/Citrix Metaframe. Any and all assistance in this matter would be greatly appreciated. Thank you.
Kary Moore February 06, 2001 18:41 PM GMT Answers
I have a similar problem with a different printer. Check in C:\WINNT\SYSTEM32\SPOOL\w32x86\3 dirctory (assuming Intel computer) for a *.GPD file (search all of the GPD files till you find the one for your model of printer)... edit this file to change your default resolution (DPI rating)... if this file does not exist, then you are in the same shape I'm in :)
|file: /Techref/language/pcl/defaultresnt.htm, 1KB, , updated: 2001/2/8 09:16, local time: 2022/9/30 06:34,
|©2022 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.massmind.org/Techref/language/pcl/defaultresnt.htm"> language pcl defaultresnt</A>
|Did you find what you needed?|
Welcome to massmind.org!
Welcome to www.massmind.org!