USING THE PM COMMAND The Polygon Mode ( PM ) command is used to define shapes, such as block letters or any unique area. After the shape has been defined, you need to exit polygon mode to fill and/or edge the polygon the is stored in the buffer. For more information see the PCL 5 Printer Language Technical Reference Manual. NOTE: This set of HP-GL/2 commands draws a picture of an electrical outlet. LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT. EcE Resets the printer. Ec%0B Enters HP-GL/2 mode. IN; Initializes HP-GL/2 mode. SP1; Selects pen number 1, (black). Even though there is no physical pen, the SP command must be used to enable printing. PA2000,2000; Specifies absolute plotting, then moves to (2000,2000). PM0;PD3000,2000,3000,3000; Enters polygon mode, stores a Pen Down command, at locations (3000,2000), and (3000,3000). PD2000,3000,2000,2000; Stores two more locations, (2000,3000), and (2000,2000). PM1; Closes the first polygon. PD2080,2160,2480,2160,2480, 2340,2080,2340,2080,2160; Stores 5 locations for a subpolygon. PM1; Closes the subpolygon. PD2080,2660,2480,2660,2480, 2840,2080,2840,2080,2660; Stores 5 more locations for another subpolygon. PM1; Closes the second subpolygon. PD2920,2340,2920,2660,2720, 2660; Begins a third subpolygon that draws the ground plug portion of the receptacle. AA2720,2500,180;PD2920,2340; Stores a 180 degree arc that begins at (2720,2660), the previous current pen location, and ends at (2720,2500). Draws a line to 2920,2340. PM2;FP;EP; Closes the subpolygon, and exits polygon mode. "FP" fills the polygon, using the even/odd default method, and "EP" edges the polygon and subpolygons currently stored in the buffer. NOTE: The Even/Odd fill method of FP is the default. To determine which portions of a single polygon or a series of subpolygons are filled when you send a FP command, simply draw a straight line extending from any point within an enclosed area of the polygon to a point outside the polygon. FP fills the enclosed area in question only if the line you have drawn intersects the edges of the polygon an odd number of times. For a visual example of this please see page 21-15 of the Updated PCL 5 Printer Language Technical Reference Manual. Ec%0A Enters the PCL mode. EcE Sends a reset to end the job and eject the page. Copyright Hewlett-Packard Co. 1993 The information contained herein is subject to change without notice. Hewlett-Packard shall not be liable for incidental or consequential damages in connection with the use of this material.
file: /Techref/language/pcl/lj1914.asc, 4KB, , updated: 1993/11/15 16:18, local time: 2024/11/14 03:40,
3.233.242.216:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://www.massmind.org/Techref/language/pcl/lj1914.asc"> language pcl lj1914</A> |
Did you find what you needed? |
Welcome to massmind.org! |
Welcome to www.massmind.org! |
.