USING THE SELECT SECONDARY FONT ( FN ) COMMAND The Select Secondary Font command ( FN ), allows any accessible font that has been assigned a font ID number to be selected as the secondary (alternate) font. For more information see the PCL 5 Printer Language Technical Reference Manual. The syntax for this command is as follows: FN font-ID; LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT. EcE Resets the printer. Ec*c28D Specifies a font ID number of 28. Ec(s1p18v0s3b4148T Selects an 18-point Universe Bold font as the primary font. Ec*c6F Assigns the currently selected font as the temporary font with the current ID number (28). Ec%0B Enters HP-GL/2 mode. IN; Initializes HP-GL/2 mode. SP1; Selects pen number 1, (black). Even though there is no physical pen, the SP command must be used to enable printing. PA1500,1500; Specifies absolute plotting and moves to (1500,1500). DT#; Defines "#" as a label terminator (non- printing). LBLaserJet Printers CR-LF#; Prints "LaserJet Printers" in the currently selected font, which is the default Stick font, followed by a Carriage Return and Line Feed (CR-LF). AD4,18;FN28;SA; Uses the AD command to designate an 18-point font from within HP-GL/2 mode; selects the PCL font with font ID number 28 as the secondary font; selects the font. LBLaserJet Printers#; Prints "LaserJet Printers" in the newly selected font. Ec%0A Enters PCL mode. EcE Sends a reset to end the job and eject the page. Copyright Hewlett-Packard Co. 1993 The information contained herein is subject to change without notice. Hewlett-Packard shall not be liable for incidental or consequential damages in connection with the use of this material.
|file: /Techref/language/pcl/lj2051.asc, 3KB, , updated: 1993/11/15 17:24, local time: 2022/6/26 11:05,
|©2022 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.massmind.org/Techref/language/pcl/lj2051.asc"> language pcl lj2051</A>
|Did you find what you needed?|
Welcome to massmind.org!
Welcome to www.massmind.org!