please dont rip this site

HP PCL Unit Of Measure Command


Where # is one of 96,100,120,144, 150,160,180,200, 225,240,288,300, 360,400,450,480, 600,720,800,900, 1200,1440,1800, 2400,2600,7200

This setting is local to the current print environment and is defaulted and restored when calling a macro.

I have seen several instances where executing a macro that has not been defined (e.g. esc&f30000Yesc&f2X) results in the Unit of Measure being reset the default setting for the printer. Apparently, there is a small bug in the PCL interpreter in some printers (6P, 4000) that causes the restoration of the setting to not occur when the macro is not found.

file: /Techref/language/pcl/unitofmeasure.htm, 0KB, , updated: 2003/6/16 12:59, local time: 2024/6/24 18:53,

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF=""> HP PCL Unit Of Measure Command</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.

Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?


Welcome to!


Welcome to!