Rudy Wieser says:
I've got a 24C16 "programmer" here, that takes it's current from the Printer-port. I just wired 3 output-pins together thru BAT 85 diodes (0.3 volts voltage-drop). Other parts are two BAT 85 diodes to create two Open-collector outputs (for SDA & SCL) , and two 10 K-ohm resistors as pull-ups. The whole "circuit" is build into a connector, just leaving 4 threads going to my "adapter" ( a simple IC-socket ). It has not failed me yet !
|file: /Techref/mem/eeprom/24x16.htm, 0KB, , updated: 2002/1/14 06:41, local time: 2023/1/29 07:44,
|©2023 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.massmind.org/Techref/mem/eeprom/24x16.htm"> mem eeprom 24x16</A>
|Did you find what you needed?|
Welcome to massmind.org!
Welcome to www.massmind.org!