please dont rip this site

PIC Specific  GPS / Centronix IO

Brian Kraut [engalt@earthlink.net] says:

here is the printer interface code.
Sorry to all you MPLAB users that it is in Parallax code.  Also, sorry that it
is not very well doccumented and I don't have a schematic handy.  If there is
enough interest I could be persuaded to write a construction article on this for
Circuit Cellar or whoever else would publish it.

; PROGRAM: PRNT6.SRC     
; Written     May 1, 1999
; Revised     June 13, 1999   
; This program takes a NMEA input and outputs Lat/Long to a standard
; parallel printer
; 3 Changed to 16c72, added optocoupler input
; 4 added input of VTG sentence and speed, heading and status output
; 5 added variable print times on switch
; 6 date from RMC

                device  pic16c72,xt_osc,wdt_off,protect_off
		
		

bit_K           =       49              ;Change this value for desired baudrate
half_bit        =       bit_K/2         ;as shown in table.
parout          =       rb              ;parallel port data 0-7
strobe          =       rc.3            ;strobe line output
busy            =       rc.2            ;busy line input
serial_in       =       rc.0            ;NMEA input
short           =       rc.4            ;2 minute switch
long            =       rc.5            ;1 hour switch



		org     020h            ;Start of available RAM

bit_cntr        ds      1               ;Number of received bits
delay_cntr      ds      1
rcv_byte        ds      1               ;The received byte
commas          ds      1
t_1             ds      1               ;first character
t_2             ds      1               ;second character
t_3             ds      1               ;third character
t_4             ds      1               ;fourth character
t_5             ds      1               ;fifth character
t_6             ds      1               ;
t_7             ds      1               ;
t_8             ds      1               ;
t_9             ds      1               ;
t_10            ds      1               ;
t_11            ds      1               ;
t_12            ds      1               ;
t_13            ds      1               ;
t_14            ds      1               ;
t_15            ds      1               ;
t_16            ds      1               ;
t_17            ds      1               ;
t_18            ds      1               ;
t_19            ds      1               ;
t_20            ds      1               ;
t_21            ds      1               ;
t_22            ds      1               ;
t_23            ds      1               ;
t_24            ds      1               ;
t_25            ds      1               ;
t_26            ds      1               ;
t_27            ds      1               ;
t_28            ds      1               ;
t_29            ds      1               ;
t_30            ds      1               ;
t_31            ds      1               ;
t_32            ds      1
t_33            ds      1
t_34            ds      1
t_35            ds      1
t_36            ds      1
t_37            ds      1
t_38            ds      1
t_39            ds      1
t_40            ds      1
t_41            ds      1
t_42            ds      1
t_43            ds      1
t_44            ds      1
t_45            ds      1
t_46            ds      1
t_47            ds      1
temp            ds      1
waitdly         ds      1
waitdly2        ds      1
minutes         ds      1
nogga           ds      1
nozda           ds      1
comms           ds      1

		org     0               ;Start of code space
		jmp     begin            


; Set up chip 
		org     05h

begin           setb    rp0 
                mov     trisc,#00110101b ;rc.0, 2, 4, 5 input, others output
                clr     trisb           ;rb output
                mov     option,#04h     ;
                mov     adcon1,#07h
                clrb    rp0
                                
RMC             call    ser_in
                cjne    rcv_byte,#24h,RMC       ;"$"
                call    ser_in
                cjne    rcv_byte,#47h,RMC       ;"G"
                call    ser_in
                cjne    rcv_byte,#50h,RMC       ;"P"
                call    ser_in
                cjne    rcv_byte,#52h,RMC       ;"R"
                call    ser_in
                cjne    rcv_byte,#4dh,RMC       ;"M"
                call    ser_in
                cjne    rcv_byte,#43h,RMC       ;"C"
                call    ser_in
                cjne    rcv_byte,#2Ch,RMC       ;","
                
time            call    ser_in                  ;input time t_1 to t_9
                cje     rcv_byte,#2ch,:com1     ;goto next field
                mov     t_1,rcv_byte            ;h
                call    ser_in                  
                cje     rcv_byte,#2ch,:com1     ;goto next field
                mov     t_2,rcv_byte            ;h
                call    ser_in                  
                cje     rcv_byte,#2ch,:com1     ;goto next field
                mov     t_3,rcv_byte            ;m
                call    ser_in                  
                cje     rcv_byte,#2ch,:com1     ;goto next field
                mov     t_4,rcv_byte            ;m
                call    ser_in                  
                cje     rcv_byte,#2ch,:com1     ;goto next field
                mov     t_5,rcv_byte            ;s
                call    ser_in
                cje     rcv_byte,#2ch,:com1     ;goto next field
                mov     t_6,rcv_byte            ;s
		call    ser_in
                cje     rcv_byte,#2ch,:com1     ;goto next field
                mov     t_7,rcv_byte            ;.
                call    ser_in
                cje     rcv_byte,#2ch,:com1     ;goto next field
                mov     t_8,rcv_byte            ;s
                call    ser_in
                cje     rcv_byte,#2ch,:com1     ;goto next field
                mov     t_9,rcv_byte            ;s
                call    ser_in
                cje     rcv_byte,#2ch,:com1     ;goto next field
                call    ser_in
                cje     rcv_byte,#2ch,:com1     ;goto next field
                jmp     begin

:com1           call    ser_in
                cje     rcv_byte,#2ch,:com1a
                call    ser_in
                cje     rcv_byte,#2ch,:com1a
                call    ser_in
                cje     rcv_byte,#2ch,:com1a
                jmp     begin

:com1a          call    ser_in                  ;input lat t_10 to t_16
                cje     rcv_byte,#2ch,:com2     ;goto next field
                mov     t_10,rcv_byte           ;d
		call    ser_in   
                cje     rcv_byte,#2ch,:com2     ;goto next field
                mov     t_11,rcv_byte           ;d
		call    ser_in
                cje     rcv_byte,#2ch,:com2     ;goto next field
                mov     t_12,rcv_byte           ;m
		call    ser_in
                cje     rcv_byte,#2ch,:com2     ;goto next field
                mov     t_13,rcv_byte           ;m
		call    ser_in
                cje     rcv_byte,#2ch,:com2     ;goto next field
                mov     t_14,rcv_byte           ;.
		call    ser_in   
                cje     rcv_byte,#2ch,:com2     ;goto next field
                mov     t_15,rcv_byte           ;m
		call    ser_in
                cje     rcv_byte,#2ch,:com2     ;goto next field
                mov     t_16,rcv_byte           ;m
                call    ser_in
                cje     rcv_byte,#2ch,:com2     ;goto next field
                call    ser_in
                cje     rcv_byte,#2ch,:com2     ;goto next field
                jmp     begin

:com2           call    ser_in                  ;input N/S t_17
                cje     rcv_byte,#2ch,:com3     ;goto next field
                mov     t_17,rcv_byte           ;N/S
                call    ser_in
                cje     rcv_byte,#2ch,:com3     ;goto next field
                jmp     begin


:com3           call    ser_in                  ;input lon t_18 to t_25
                cje     rcv_byte,#2ch,:com4     ;goto next field
                mov     t_18,rcv_byte           ;d
		call    ser_in
                cje     rcv_byte,#2ch,:com4     ;goto next field
                mov     t_19,rcv_byte           ;d
                call    ser_in
                cje     rcv_byte,#2ch,:com4     ;goto next field
                mov     t_20,rcv_byte           ;d
                call    ser_in
                cje     rcv_byte,#2ch,:com4     ;goto next field
                mov     t_21,rcv_byte           ;m
		call    ser_in
                cje     rcv_byte,#2ch,:com4     ;goto next field
                mov     t_22,rcv_byte           ;m
		call    ser_in   
                cje     rcv_byte,#2ch,:com4     ;goto next field
                mov     t_23,rcv_byte           ;.
		call    ser_in
                cje     rcv_byte,#2ch,:com4     ;goto next field
                mov     t_24,rcv_byte           ;m
                call    ser_in
                cje     rcv_byte,#2ch,:com4     ;goto next field
                mov     t_25,rcv_byte           ;m
		call    ser_in
                cje     rcv_byte,#2ch,:com4     ;goto next field
                call    ser_in
                cje     rcv_byte,#2ch,:com4     ;goto next field
                call    ser_in
                cje     rcv_byte,#2ch,:com4     ;goto next field
                jmp     begin

:com4           call    ser_in                  ;input E/W t_26
                cje     rcv_byte,#2ch,:com5     ;goto next field
                mov     t_26,rcv_byte           ;E/W
		call    ser_in
                cje     rcv_byte,#2ch,:com5     ;goto next field
                jmp     begin

:com5           call    ser_in                  ;input speed t_27 to t_30
                cje     rcv_byte,#2ch,:com6     ;goto next field
                mov     t_27,rcv_byte           ;tens
		call    ser_in   
                cje     rcv_byte,#2ch,:com6     ;goto next field
                mov     t_28,rcv_byte           ;ones
		call    ser_in
                cje     rcv_byte,#2ch,:com6     ;goto next field
                mov     t_29,rcv_byte           ;.
		call    ser_in
                cje     rcv_byte,#2ch,:com6     ;goto next field
                mov     t_30,rcv_byte           ;tents
		call    ser_in   
                cje     rcv_byte,#2ch,:com6     ;goto next field
                call    ser_in
                cje     rcv_byte,#2ch,:com6     ;goto next field
                call    ser_in
                cje     rcv_byte,#2ch,:com6     ;goto next field
                jmp     begin

:com6           call    ser_in                  ;input heading t_31 to t_35
                cje     rcv_byte,#2ch,:com7     ;goto next field
                mov     t_31,rcv_byte           ;hundreds
                call    ser_in
                cje     rcv_byte,#2ch,:com7     ;goto next field
                mov     t_32,rcv_byte           ;tens
                call    ser_in
                cje     rcv_byte,#2ch,:com7     ;goto next field
                mov     t_33,rcv_byte           ;ones
                call    ser_in
                cje     rcv_byte,#2ch,:com7     ;goto next field
                mov     t_34,rcv_byte           ;.
                call    ser_in
                cje     rcv_byte,#2ch,:com7     ;goto next field
                mov     t_35,rcv_byte           ;tenths

:com7           call    ser_in                  ;input date T_37 to T_42
                cje     rcv_byte,#2ch,:com9     ;goto next field
                mov     t_37,rcv_byte           ;day
                call    ser_in
                cje     rcv_byte,#2ch,:com9a    ;single character
                mov     t_38,rcv_byte           ;day
:com9           call    ser_in
                cje     rcv_byte,#2ch,:com10    ;goto next field
                mov     t_39,rcv_byte           ;month
                call    ser_in
                cje     rcv_byte,#2ch,:com10a   ;single character
                mov     t_40,rcv_byte           ;month
:com10          call    ser_in
                cje     rcv_byte,#2ch,:com11    ;goto next field
                call    ser_in   
                cje     rcv_byte,#2ch,:com11    ;goto next field
                call    ser_in
                cje     rcv_byte,#2ch,:com11    ;goto next field
:com11          call    ser_in
                cje     rcv_byte,#2ch,output
                mov     T_41,rcv_byte
                call    ser_in
                mov     T_42,rcv_byte
                call    ser_in
                cje     rcv_byte,#2ch,output
                mov     T_41,rcv_byte
                call    ser_in
                mov     T_42,rcv_byte
                jmp     output
                
                
:com9a          mov     t_38,t_37
                mov     t_37,#30h
                jmp     :com9

:com10a         mov     t_40,t_39
                mov     t_39,#30h
                jmp     :com10




:cr             call    ser_in
                cjne    rcv_byte,#0dh,:cr       ;goto next field

GGA                                             ;input status from GGA 
                mov     nogga,#14h              ;check up to 20 sentences 
                mov     t_36,#33h               ;quality n/a
:next           dec     nogga
                jz      output
:nextx          call    ser_in
                cjne    rcv_byte,#24h,:nextx    ;"$"
                call    ser_in
                cjne    rcv_byte,#47h,:nextx    ;"G"
                call    ser_in
                cjne    rcv_byte,#50h,:nextx    ;"P"
                call    ser_in
                cjne    rcv_byte,#47h,:next     ;"G"
                call    ser_in
                cjne    rcv_byte,#47h,:next     ;"G"
                call    ser_in
                cjne    rcv_byte,#41h,:next     ;"A"
                call    ser_in
                cjne    rcv_byte,#2Ch,:next     ;","
                
                mov     comms,#05h              ;count 5 commas
:comma          call    ser_in
                cjne    rcv_byte,#2ch,:comma    ;
                djnz    comms,:comma
:input          call    ser_in
                mov     T_43,rcv_byte           ;gps quality

                cjne    T_43,#30h,:next2        ;0
                mov     T_44,#44h               ;"D"
                mov     T_45,#52h               ;"R"
                mov     T_46,#20h               ;space
                mov     T_47,#20h               ;space
                jmp     output
:next2          cjne    T_43,#31h,:next3        ;1
                mov     T_44,#47h               ;"G"
                mov     T_45,#50h               ;"P"
                mov     T_46,#53h               ;"S"
                mov     T_47,#20h               ;space
                jmp     output
:next3          cjne    T_43,#32h,:next4
                mov     T_44,#44h               ;"D"
                mov     T_45,#47h               ;"G"
                mov     T_46,#50h               ;"P"
                mov     T_47,#53h               ;"S"
                jmp     output
:next4          mov     T_44,#58h               ;"X"
                mov     T_45,#58h               ;"X"
                mov     T_46,#58h               ;"X"
                mov     T_47,#58h               ;"X"
                jmp     output

                
          

                
                
         


ser_in          snb     serial_in       ;Detect start bit. Change to
					;sb serial_in if using 22k resistor
					;input. 
                jmp     ser_in

start_bit       call    start_delay     ;Wait one-half bit time to the middle
					;of the start bit. 
		
                jb      serial_in,ser_in

					;If the start bit is still good,
					;continue. Otherwise, resume waiting.
					;Change to jnb Serial_in, :start_bit
					;if using 22k resistor input. 

		mov     bit_cntr, #8    ;Set the counter to receive 8 data bits
		clr     rcv_byte        ;Clear the receive byte to get ready
					;for new data. 

:receive        call    bit_delay       ;Wait one bit time. 
                movb    c,serial_in     ;Put the data bit into carry. 
                                        ;Change to movb c,/serial_in if using
					;22k resistor input. 
		rr      rcv_byte        ;Rotate the carry bit into the receive
					;byte.
		djnz    bit_cntr,:receive       
					;Not eight bits yet? Get next bit.
                call    bit_delay       ;Wait for stop bit. 
                ret 

output          clrb    strobe
                mov     parout,T_10     ;lat T_10 to T_16
                call    strb
                mov     parout,T_11
                call    strb
                mov     parout,T_12
                call    strb
                mov     parout,T_13
                call    strb
                mov     parout,T_14     ;decimal
                call    strb
                mov     parout,T_15
                call    strb
                mov     parout,T_16
                call    strb
                mov     parout,#20h     ;space
                call    strb
                mov     parout,T_17     ;N/S
                call    strb
                mov     parout,#2ch     ;","
                call    strb
                mov     parout,#20h     ;space
                call    strb

                mov     parout,T_18     ;lon T_18 to T_25
                call    strb
                mov     parout,T_19
                call    strb
                mov     parout,T_20
                call    strb
                mov     parout,T_21  
                call    strb
                mov     parout,T_22
                call    strb
                mov     parout,T_23
                call    strb
                mov     parout,T_24
                call    strb
                mov     parout,T_25
                call    strb
                mov     parout,#20h     ;space
                call    strb
                mov     parout,T_26     ;E/W
                call    strb
                mov     parout,#2ch     ;","
                call    strb
                mov     parout,#20h     ;space
                call    strb

                mov     parout,#44h     ;"D"
                call    strb
                mov     parout,#41h     ;"A"
                call    strb
                mov     parout,#54h     ;"T"
                call    strb
                mov     parout,#45h     ;"E"
                call    strb
                mov     parout,#20h     ;space
                call    strb
                mov     parout,T_37     ;D
                call    strb
                mov     parout,T_38     ;D
                call    strb
                mov     parout,#2fh     ;"/"
                call    strb
                mov     parout,T_39     ;M
                call    strb
                mov     parout,T_40     ;M
                call    strb
                mov     parout,#2fh     ;"/"
                call    strb
                mov     parout,T_41     ;Y
                call    strb
                mov     parout,T_42     ;Y
                call    strb
                mov     parout,#2ch     ;","
                call    strb
                mov     parout,#20h     ;space
                call    strb

                mov     parout,#55h     ;"U"
                call    strb
                mov     parout,#54h     ;"T"
                call    strb
                mov     parout,#43h     ;"C"
                call    strb
                mov     parout,#20h     ;space
                call    strb

                mov     parout,T_1      ;time T_1 to T_9
                call    strb
                mov     parout,T_2
                call    strb
                mov     parout,T_3
                call    strb
                mov     parout,T_4
                call    strb
                mov     parout,T_5
                call    strb
                mov     parout,T_6
                call    strb
                mov     parout,T_7
                call    strb
                mov     parout,T_8
                call    strb
                mov     parout,T_9
                call    strb
                mov     parout,#2ch     ;","
                call    strb
                mov     parout,#20h     ;space
                call    strb

                mov     parout,#53h     ;"S"
                call    strb
                mov     parout,#4fh     ;"O"
                call    strb
                mov     parout,#47h     ;"G"
                call    strb
                mov     parout,#20h     ;space
                call    strb

                mov     parout,T_27     ;speed T_27 to T_30
                call    strb
                mov     parout,T_28
                call    strb
                mov     parout,T_29
                call    strb
                mov     parout,T_30
                call    strb
                mov     parout,#2ch     ;","
                call    strb
                mov     parout,#20h     ;space

                mov     parout,#48h     ;"H"
                call    strb
                mov     parout,#44h     ;"D"
                call    strb
                mov     parout,#47h     ;"G"
                call    strb
                mov     parout,#20h     ;space
                call    strb

                mov     parout,T_31     ;heading T_31 to T_35
                call    strb
                mov     parout,T_32
                call    strb
                mov     parout,T_33
                call    strb
                mov     parout,T_34
                call    strb
                mov     parout,T_35
                call    strb
                mov     parout,#2ch     ;","
                call    strb
                mov     parout,#20h     ;space
                call    strb

                mov     parout,T_44     ;status T_44 to T_47
                call    strb
                mov     parout,T_45
                call    strb
                mov     parout,T_46
                call    strb
                mov     parout,T_47
                call    strb
                mov     parout,#0dh     ;cr
                call    strb
                mov     parout,#0ah     ;lf
                call    strb

prntdelay       jnb     short,min2      ;jump to 2 minute delay
                jnb     long,hour       ;jump to 1 hour delay

min15           mov     minutes,#10h    ;15 minute delay
                jmp     wait

hour            mov     minutes,#3dh    ;60 minute delay
                jmp     wait

min2            mov     minutes,#03h    ;2 minte delay
                

wait            dec     minutes         ;decrement minutes and restart
                jz      begin           ;at 0

                mov     waitdly,#03fh
:wait2          nop
                mov     waitdly2,#31h
:wait3          nop
                call    outdelay
                djnz    waitdly2,:wait3
                djnz    waitdly,:wait2
                jmp     wait



strb            call    outdelay        ;printer strobe
                setb    strobe
                call    outdelay
                clrb    strobe
                ret
                
                

outdelay        mov     delay_cntr,#0ddh
:loop           nop
                djnz    delay_cntr,:loop
                jb      busy,outdelay
                ret
                


; This delay loop delays the correct time for the serial in routine

bit_delay       mov     delay_cntr,#bit_K       ;no overflow, delay and ret
:loop           nop
		djnz    delay_cntr,:loop
		ret

; This delay loop is identical to bit_delay above, but provides half the delay
; time. 

start_delay     mov     delay_cntr,#half_bit 
:loop           nop
		djnz    delay_cntr, :loop
		ret



file: /Techref/microchip/Centronix.htm, 23KB, , updated: 2006/9/17 19:32, local time: 2024/3/28 16:57,
TOP NEW HELP FIND: 
44.203.219.117:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://www.massmind.org/Techref/microchip/Centronix.htm"> PIC Specific &nbsp;GPS / Centronix IO</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to massmind.org!

 

Welcome to www.massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .