Function 2Eh Set/Reset Verify Switch
Set verify flag
entry AH 2Eh
AL 00 to turn verify off (default)
01 to turn verify on
note 1) This is the call invoked by the DOS VERIFY command
2) Setting of the verify switch can be obtained by calling call 54h
3) This call is not supported on network drives
4) DOS checks this flag each time it accesses a disk
|file: /Techref/INT/21f/2e.htm, 0KB, , updated: 1999/2/20 10:26, local time: 2023/12/9 04:01,
|©2023 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.massmind.org/techref/INT/21f/2e.htm"> INT 21f 2e</A>
|Did you find what you needed?|
Welcome to massmind.org!
Welcome to www.massmind.org!