please dont rip this site

(# before a part number indicates a new listing as of 04/12/95)

Atmel              AT25C01      1K bit EEPROM
                   AT25C02      2K  "    "
                   AT25C04      4K  "    "
                   AT45D081     8M     FLASH
Catalyst           CAT33C704    3-volt CAT35C704
                   CAT35C704    4K  "  EEPROM with security
                   CAT64LC10    1K  "    "
                   CAT64LC20    2K  "    "
                   CAT64LC40    4K  "    "
Intersil           CDP68HC68R1  1K  "   SRAM
                   CDP68HC68R2  2K  "    "
Motorola           MCM2814      2K  "  EEPROM
National           NM25C04      4K  "    "
Ramtron            FM2504(0/1)  4K  "   FRAM
                   FM2516(0/1) 16K  "    "
Xicor              X25020       2K  "  EEPROM
                   X25C02       2K  "    "
                   X25040       4K  "    "
                   X25043       4K  "    "    with reset supervisor
                   X25080       8K  "    "
                   X25160      16K  "    "
                   X25320      32K  "    "
                   X25640      64K  "    "
                   X25128     128K  "    "
                   X25401     256K  "  NOVRAM

SRAMs@ (some serial)

Dallis Semiconductor (1 wire, not SPI)

Bus contention

See also:

file: /Techref/mem/spi.htm, 1KB, , updated: 2004/6/9 09:43, local time: 2024/6/15 16:14,

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF=""> mem spi</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.

Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?


Welcome to!


Welcome to!