Displays or sets the system time. TIME [time] Type TIME with no parameters to display the current time setting and a prompt for a new one. Press ENTER to keep the same time. If Command Extensions are enabled the TIME command supports the /T switch which tells the command to just output the current time, without prompting for a new time.
|file: /Techref/os/win/winnt/slide66.htm, 1KB, , updated: 2004/5/26 14:03, local time: 2021/12/6 03:40,
|©2021 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.massmind.org/techref/os/win/winnt/slide66.htm"> Help for all NT Version 4.0 commands</A>
|Did you find what you needed?|
Welcome to massmind.org!
Welcome to www.massmind.org!