The original method of printing PCB's was via silkscreen, and not just the silkscreen layer, the entire etch resist, soldermask and the component silkscreen. As the video here shows, the method is still very useful, as long as the board is not very fine pitch. And you can print T-Shirts to go with the boards!
|file: /Techref/pcb/etch/silkscreen.htm, 0KB, , updated: 2019/1/20 21:36, local time: 2023/10/3 13:13,
|©2023 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.massmind.org/techref/pcb/etch/silkscreen.htm"> PCB Etch Resist via Silkscreen</A>
|Did you find what you needed?|
Welcome to massmind.org!
Welcome to www.massmind.org!