please dont rip this site

by Gary Shearer [g.shearer at vanderbilt.edu]

What do I need to get started with JAL?

Before you begin, you will need to collect the necessary hardware and software items to have something to work with. I will start with a basic list and provide further explanation on each of the listed items a bit later. Once you are familiar with the items you require, you can set about the tasks of making decisions as to which items will fit your needs and begin collecting the needed materials. You will need the following:

As you read through the explanations of each item on the list, you can decide for yourself exactly what will fit your specific needs. I am recommending the 16F84­ 10/P microcontroller, as this is the device that I will be using in most of my examples. Later, I will discuss other hardware and you will need to make the necessary adjustments for the differences in devices.

Basic electronics knowledge would also be quite helpful. I will go into detail about specific circuits in order to provide a complete understanding of the subject matter. This is only a starting point. As you progress, I am sure you will want to experiment with many other peripheral devices which will enable you to do even more with your chosen microcontroller

Hardware

It will be necessary to obtain a microcontroller and the other associated hardware items on which to run the programs you will be writing. JAL supports several microcontrollers, which are manufactured by Microchip Technologies and Scenix. The supported version of JAL will work with Microchip Technologies 16C84/04, 16C84/10, 16F84/04 and 16F84/10 microcontrollers. Also, the SX18/50 and SX28/50 microcontrollers by Scenix can be used. Limited support versions of JAL lengthen the list of microcontrollers, which can be used, however, all the features of the additional microcontrollers may not be fully implemented at this time. There may also be a few undiscovered and uncorrected bugs so I recommend that you use the supported version for your beginning efforts and try out the unsupported versions when you gain a bit of experience.

I am including a short list of suppliers where both the microcontrollers and their necessary support hardware may be purchased. This is not by any means a complete list, but a good starting point. There may be other smaller companies, who have hardware for sale, but at this time, I have identified at least a partial list for you and most of these companies will ship internationally.

Supplier Web Site Microcontroller
Digi­Key Corp. www.digikey.com PIC
Arrow Electronics www.arrow.com PIC
Farnell Electronics www.farnell.com PIC
Microchip Technologies www.microchip.com PIC
Parallax, Inc. www.parallaxinc.com SX

Microchip Technologies sells their products directly, however, they charge about 150% of the normal price and will only ship via UPS ground within the United States. Parallax is the prime distributor for Scenix and they also sell many of the support hardware items you will need as well as their own products using the PIC and SX microcontrollers. Farnell is a worldwide distributor and their products are available through Newark Electronics in the United States www.newark.com I have chosen these vendors as they distribute their products worldwide.

See Beginners checklist for PICs for more information on programmers and setting up PIC hardware. (EditHint: move non-JAL-specific text there)

See also:


file: /Techref/piclist/jal/start.htm, 5KB, , updated: 2014/3/31 11:29, local time: 2024/3/19 04:26,
TOP NEW HELP FIND: 
44.213.99.37:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://www.massmind.org/techref/piclist/jal/start.htm"> What do I need to get started with JAL?</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to massmind.org!

 

Welcome to www.massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .