Goal:
This Project has been designed for building a Robot using the 'SX52 Ethernet Board Starter Kit' as an entry into the SXList embedded ethernet starter contest.
Procedure:
Result:
The Firmware will allow the User to Remote 'Drive' the Robot and view through the Robot Camera on a PC via an Ethernet cable.
Other Possibilities:
Files included :
My_Demo_2-1.src - The Ethernet/Cam/Motors PIC Asm
Cam-Joystk-4.html - The web page to be served by the ethernet demo board.
Sch_Camera_2-1.gif - Schematic of Camera hookup
Sch_Motor_2-3.gif - Schematic of motors hookup
Readme.txt - This Howto file
Author:
John Coleman
jlsilicon@yahoo.com
http://jlc.iwarp.com/jstk_bot/Joystick.html
Fine print (the usual):
I have tested these on my own applications, but No waranty or responsibility is placed upon the author of any of these Design files or problems/errors resulting from them.
See
file: /Techref/scenix/rov/index.htm, 2KB, , updated: 2014/2/24 15:55, local time: 2024/10/4 08:29,
35.171.164.77:LOG IN ©2024 PLEASE DON'T RIP! THIS SITE CLOSES OCT 28, 2024 SO LONG AND THANKS FOR ALL THE FISH!
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://www.massmind.org/techref/scenix/rov/index.htm"> ROV: Ethernet Robot Camera & Motors Project</A> |
Did you find what you needed? |
Welcome to massmind.org! |
Welcome to www.massmind.org! |
.