SX Embedded Controller Instruction

ADD fr1,fr2
Description:	Add fr2 into fr1
Operation:	fr1 += W = fr2
Flags affected:	C DC Z
Registers affected:	W fr1
Sources referenced:	fr2
Cycles:	2
Opcode:
Actually compiles to:	mov W, fr2; add fr1, W
Microchip PIC syntax:	MOVF fr2,0; ADDWF fr1,1
Notes:

file: /techref/scenix/inst/addfr1fr2.htm, 1KB, , updated: 2001/9/10 11:14, local time: 2008/11/23 04:25,

^{38.103.63.57:LOG IN}

©2008 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it!
<A HREF="http://www.massmind.org/techref/scenix/inst/addfr1fr2.htm"> SX Instruction ADD fr1,fr2</A>

Did you find what you needed?

"No. I'm looking for: "
"No. Take me to the search page."
"No. Take me to the top so I can drill down by catagory"
"No. I'm willing to pay for help, please refer me to a qualified consultant"
"No. But I'm interested. me at when this page is expanded."

Welcome to massmind.org!