|Description:||Move fr into W|
|Operation:||W = fr|
|Details:||SX Users Manual page # 95|
|Microchip PIC syntax:||MOVF fr,0|
Phil Pilgrim says: Incidentally, the way to move a register to W without setting any flags is:
SWAP Reg MOV W,<>Reg SWAP Reg 'Optional, to restore Reg to original state.
or, if RTW is enabled:
MOV W,<>Reg SWAP WREG
|file: /Techref/scenix/inst/movwfr.htm, 1KB, , updated: 2007/2/28 18:26, local time: 2022/7/1 15:45,
|©2022 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.massmind.org/techref/scenix/inst/movwfr.htm"> SX Instruction MOV W,fr</A>
|Did you find what you needed?|
Welcome to massmind.org!
Welcome to www.massmind.org!